How to Clean Upholstery Using Sudochem Fiber Form Low Foam Upholstery Cleaner

Keeping upholstery clean requires the right technique and the right detergent. Sudochem Fiber Form Low Foam Upholstery Cleaner is formulated to remove deep dirt while keeping foam levels controlled, which makes extraction faster and drying easier. Here is a complete guide you can use on your website.

Why Use Sudochem Fiber Form Low Foam Upholstery Cleaner

Sudochem Fiber Form delivers strong cleaning performance without excessive foam. Low foam makes it possible for extraction machines to work efficiently and prevents tanks from filling with foam. This leads to faster cleaning, better soil removal and shorter drying times. The detergent is built to lift stains, oils and embedded dust while leaving minimal residue.

What You Need Before Cleaning

• Vacuum cleaner with upholstery attachment

• Spray pump, extraction machine or bucket with clean sponge

• Soft bristle brush or upholstery brush

• Microfiber towels

• Rinse aid (Sudochem Rinse pro 0 for final finishing

Step by Step Upholstery Cleaning Guide

Step 1, Vacuum Thoroughly

Vacuum the chairs or car seats to remove dust, sand and loose dirt. This is the foundation of proper upholstery cleaning.

Step 2, Prepare the Detergent

Follow the dilution instructions on the jerrycan. For a 10 litre solution add 200 to 250 millilitres of Fiber Form for heavy soiling.

Step 3, Apply the Solution

Apply the prepared detergent using a spray pump, extraction machine or sponge. Ensure the surface is evenly covered.

Step 4, Allow Dwell Time

Let the solution sit for 3 to 5 minutes to break down stains, body oils and deeply embedded dirt.

Step 5, Agitate Gently

Use a soft brush or sponge to gently scrub the fabric. This helps lift stubborn dirt without damaging the fibers.

Step 6, Extract the Dirt

Use a wet vacuum or extraction machine to suck out the detergent. At this point you will see a visible improvement as dirt is pulled out.

Step 7, Rinse for a Clean Finish

Add rinse aid to clean water and apply it using a sponge or sprayer. Extract again to remove detergent residues and support faster drying.

Expert Tips for Best Results

• Work section by section for consistent results• Ventilate the room or open car doors to support drying• Test the detergent on a hidden area when working on delicate fabric• Do not sit on seats before they are completely dry

Why Low Foam Matters

Fiber Form is designed with low foam to ensure smooth extraction. High foam slows machines and traps dirt instead of releasing it. Low foam formulas allow cleaners to remove more water and soil with each pass, which leads to quicker drying and a fresher finish. Cleaning power remains high, only the foam is reduced, giving the perfect balance for professional upholstery care.