Key Benefits
Long-Term Protection
Delivers up to 15 years of proven protection, independently performance-tested under certified laboratory conditions.
Advanced Penetration Technology
Formulated with nano-scale fluorochemical polymers that deeply penetrate dense substrates for superior internal protection.
Total Surface Defense
Protects against water and oil-based stains, including food spills, grease, mould, mildew, efflorescence, pollution, and weather damage.
Easy Application
Water-based formula ensures smooth, efficient application across a wide range of surfaces.
Natural Finish
Preserves the original look and feel of stone without altering colour, texture, or slip resistance.
Stone Safe Formula
Non-etching and will not discolour delicate surfaces such as marble and other fine stones.
Breathable Protection
Vapour permeable, allowing moisture to escape while preventing internal damage.
Safer Chemistry
Free from chlorinated solvents and not classified as a carcinogenic product.
Suitable Surfaces & Applications
Designed for medium to high porosity surfaces including:
Marble, Limestone, Travertine
Sandstone and Bluestone
Cement and Clay Pavers
Terracotta, Saltillo, Quarry tiles
Ideal for both interior and exterior use, including:
Performance & Maintenance
Provides long-lasting protection for up to 15 years, depending on surface conditions, traffic, and maintenance practices.
Reapply every 5 to 7 years in high-wear environments
Avoid harsh chemicals such as strong acids, alkalis, and solvents
Use pH-neutral cleaners for best results
Important Considerations
Not suitable for sub-surface waterproofing
Do not apply above 40°C or if rain is expected within 2 hours
Allow surfaces to dry for at least 24 hours after rain before application
Coverage Guide
Coverage varies depending on surface porosity:
Surface Preparation
New surfaces must be fully cured, minimum 48 hours, up to 7 days for some concrete
Ensure all surfaces are clean, dry, and free from contaminants
Do not apply in direct sunlight
Ideal application temperature: 10°C to 28°C
Highly porous surfaces may require two coats
Application Instructions
Apply 1 to 3 coats using a roller, sprayer, or applicator
Saturate the surface evenly, ensuring a wet film remains for at least 1 minute
Allow 5 to 10 minutes for absorption
Spread excess product to adjacent areas using a squeegee
For additional coats, wait 20 to 30 minutes before reapplying
After final application, wipe off any excess using an absorbent cloth
Use a cloth lightly dampened with methylated spirits to remove any residue
Drying & Curing
Light traffic after 12 hours
Keep surface dry for 24 hours
Full cure achieved within 24 to 48 hours
